RU DE EN

+7(8142) 73-00-70

alfa.ptz@gmail.com
185001,  Petrozavodsk
Republic of Karelia, Russia

Wooden H-beam "H-20 beams”

balka

Technical specifications of construction beam "H20 beams"

  • GOST 34329-2017; GOST R ISO 9001-2015 (ISO 9001:2015)
  • European standard EN 13377-2002;
  • length — 1500-6000 mm;
  • beam height — 200 mm;
  • beam flange width — 80 mm;
  • beam flange thickness — 40 mm;
  • сhipboard thickness — 24 mm;
  • сhipboard flange width — 120 mm;
  • сhipboard tooth cutting into beam body, depth — 12 mm;
  • width of flange shoulder — 28 mm.
  • bending moment — maximum permissible value (no more than) 6.0 kNm
  • weight of construction beam — 5.3 kg/running meter;
  • bending moment — maximum permissible value (no more than) 6.0 kNm;
  • shear resistance — maximum permissible value (no more than) 12.0 kNm.

Materials

  • Plywood Details

    • FK birch plywood of 24 mm thickness produced by the best plywood mills in Russia, focused on the export of their products. Has high physical and mechanical properties, in combination with the layered structure provides extraordinary strength. meets the requirements of DIN EN 636:2015-05.

  • Glue Details

    • Glue from the European manufacturer KLEIBERIT - complies with DIN EN 301:2018-01 This ensures the strongest and most reliable connection between the flange and the beam wall.In this regard, the beam will not crack from snow and rain during operation.

  • Bar Details

    • Solid bar is produced from high-quality raw materials of coniferous wood, growing in the North of Karelia. Northern wood has a high density. Bar is produced from thin-section sawn timber by the 2ex log method. Logs for sawing ? 11-15 cm do not have rot, large and unhealthy knots, as well as other defects peculiar to thick-sawn timber of the middle part of Russia. Each joist has no more than one tongue-and-groove joint along its length, which meets the requirements of DIN EN 14080:2013-09

  • Impregnation compound Details

    • Impregnation compound from European manufacturer REMMERS - meets the requirements of EN 13377:2002.Protects the product against moisture, fungus and mold. Allows storage in the open air.Has a durable and long-lasting protective layer.

  • End cap

    • The end cap made of elastic polymer ensures reliable protection of the end face from mechanical influences in case of accidental fall and other abnormal situations.

Description

Our company carries out a full production cycle on modern equipment, using the highest quality materials that meet all the requirements of the European standard EN13377:2002. This ensures consistently high quality of the final product. The main load-bearing function of an H-beam is performed by flange made of bar. Our company produces a complete production cycle for this bar, which includes sawing the log, drying, calibration and planing the finished product. So we control the process at all stages and can be responsible for the quality of the finished product.


Photos

Back